Confined water coolers have a real prime-era right now, and its popularity is the fact, which means that a large amount of players obviously chosen to engage in exactly the type of radiator . Originally, most units of two actors, Asetek and CoolIT. Nowadays, when the industry begins to get some meat on the bones (even though the concept existed in the market good for much longer) so several manufacturers have begun to design and produce their own devices and that is precisely what distinguishes Antec Cooler 650 from many others.
We have previously tested a unit from Antec Cooler Series , namely 920, which received very good ratings thanks to its brutal performance. 920 manufactured by Asetek and the significantly different Cooler 650 (except radiator thickness) from 920 is primarily that Antec themselves been responsible for the design and even manufacturing. The concept is quite simple, in most devices have placed the pump in combination with the cooling block, which is building a portion of the hill. What Antec has done instead is to move the pump to the fan motor, this saves space and instead of the pump creates heat above the cooling block so acting cooling block on your machine. Another great advantage is that since the pump is mounted on such a surface adaptable, so you can use stronger and bigger pumps that also requires more space.
By placing the pump together with the fan and you have also chosen to allow both work and each load, to make it simple, the fan revving up – the pump works harder. The whole concept of combined fan motor + pump housing will contribute to a lower noise level and how this works in practice remains to be seen. As usual, we run cooler by a few heavy rounds Intel Burn Test Link Pack for measuring pure raw performance. What will we do with our processor, both in standard frequency as well as with an easier overclocking. To broaden the results further, we measure also in both low and high fan speed and that we at the end will mount on an extra fan and measure the radiator push / pull performance. Of course, we also listen extra carefully for the sound level as this is a big carrot for Cooler 650, which also includes pump their own voice in relation to the fan.| Intel LGA2011, 1366, 1156, 1155, 1150, 775 AMD AM2 (+), AM3 (+), FM1, FM2 |
| 159 x 120 x 27 mm (without fans) |
| 26mm high |
| about 1 kg |
| Environmentally friendly anti-corrective |
| 120 x 120 x 25 mm |
| 600-2400 RPM |
| 300 mm |
| Copper, aluminum and plastic |
No comments:
Post a Comment